Article number: 2990
Availability: In stock (9)
Delivery time: 5-7 BUSINESS DAYS

Still Spirits EZ Inline Filter is a new development in alcohol filtration.It uses a specially formulated solid activated carbon cartridge to remove unwanted flavours from distilled alcohol. The cartridge eliminates the need to handle powdered or granulated carbon. The cartridge's porous design allows the spirit to pass through and the unwanted flavours to be absorbed by the activated carbon. ( Includes a carbon cartridge) Connect the filter to the tap to a reservoir (not supplied) with a short length of clear PVC tube. The tube should not be more than 100mm long. 2. Pour 1 litre of clean water into the reservoir, open the tap and allow the water to drain through the filter. This is necessary to remove mineral salts from the carbon and to flush out any carbon dust. 3. Close the tap and add your spirit to the reservoir. 4. Adjust the alcohol level to under 50% with clean water. Check this with a Spirit Hydrometer or Alcometer. 5. Open the tap and allow the spirit to pass through the filter into a collecting pail. Tip€ One cartridge is suitable for one batch of spirit from a 25 litre still (up to about 8L of 50% spirit.) A fresh cartridge should be used for each batch.€ The washers are reusable but should be replaced when they flatten with use and no longer recover to normal thickness.

0 stars based on 0 reviews